With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fast
JSfirm

Maintenance Technician

Precision Castparts Corp. • 
South Gate, California, United States
Position Type: Permanent
Job Description:

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability – not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Position Summary

Without supervision, maintenance technicians perform turret/spindle alignments, PM tasks such as trouble shoot lubrication system, hydraulics, bar feeders, etc. trouble shoot controls, issues etc., able to diagnose and repair most any NC mechanical issues; pull and replace ball screws, hydraulic and pneumatic issues. Able to complete any task given related to facility maintenance demonstrating expertise in plumbing and general carpentry and numerous tasks involved in facility related issues. Demonstrating the ability to read mechanical drawings and electrical schematics, while serving as either a mechanical or technical SME.

Primary Duties & Responsibilities

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, ability and/or competency needed for successful performance in the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

  • Comply with PCC Code of Conduct Requirements and all PCC Cardinal Rules (e.g. Quality and Safety).
  • Work safely under functional safety guidelines such as PPE and equipment interaction.
  • All functions, duties or tasks are to be carried out in an honest, ethical and professional manner, and to be performed in conformance with applicable Company policies and procedures.
  • In the event of uncertainty or lack of knowledge of Company policies and procedures, employees are required to request clarification or explanations from superiors or authorized company representatives.
  • Handle assigned work orders and PMs (e.g., inspections, oil changes, meter readings, etc.).
  • Perform a variety of routine maintenance tasks.
  • Communicate existing and potential issues with supervisor.
  • Use our CMMS or paper records to log maintenance work.
  • Ensures that assigned machinery is kept in good working condition using preventive maintenance procedures and in accordance with manufacturer&39;s specifications
  • Inspects equipment for broken or loose safety cables, bolts, nuts, sprints, wedges and shims. Repair or replace any parts found to be unacceptable.
  • Check lubricators on the compressed air lines from the water separators in the compressed air supply lines.
  • Checks the level of hydraulic oil reservoir, adds oil as needed, checks for oil leaks on hydraulic lines and fixes accordingly.
  • Checks on furnaces and associated equipment following work order procedures.
  • Rectifies faults and problems reported by production department under supervisor&39;s instructions.
  • Carries out necessary repairs to the furnace linings.
  • Assists contractors with installations.
  • Disassembles devices to gain access to and remove defective parts.
  • Repairs or replaces defective parts in hydraulic equipment such as valves, motors, cylinders and pumps; conditioning equipment such as grinding and abrasive blast machines; mobile hydraulic equipment; and other plant equipment as designated by supervisor.
  • Lubricates and cleans parts.
  • Starts devices to test their performance.
  • Daily inspection and record keeping of various pieces of plant equipment.
  • Changes or recharges batteries, and water pumps, hydraulic hoses and other parts.
  • Repairs universal joint bearings, radiators, and changes seals on hydraulic cylinders.
  • Examines protective guards, loose bolts, and specified safety devices on trucks, and adjusts.
  • Keeps machinery areas clean.
  • Must be familiar with fundamental electrical principles including but not limited to: AC/DC Voltage, Amperage, Resistance, Continuity, Capacitance, and Grounding
  • Must be familiar with basic industrial electronics including but not limited to: contactors, limit switches, switches, circuit breakers, fuses, resolvers, and encoders.
  • Other duties as assigned.

Required Skills

  • Ability to solve mechanical, electrical, pneumatic and hydraulic issues on various production and facility equipment.
  • Troubleshooting mechanical breakdowns.
  • Ability to read, analyze and interpret technical procedures, electrical schematics, blueprints, service manuals and work order to perform required maintenance work.
  • Ability to disassemble / install new equipment, condition monitoring sensors, etc.
  • Ability to evaluate, repair and maintain plumbing, carpentry, and electrical systems.
  • Ability to read and comprehend simple instructions, short correspondence, such as safety rules and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to supervisors and other employees of the company.
  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
  • Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in situations where only limited standardization exists.
  • Must be familiar with and be able to use some of the most important equipment in the shop.

Experience & Education

  • High School Diploma or GED required.
  • College degree and/or relevant certificate/s of completion from a technical school highly preferred but not required.
  • 2+ years related experience.
  • Bilingual (Spanish) preferred but not required.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
  • Regularly required to stand, walk, and talk or hear. Regularly required to use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms Regularly lift and/or move up to 35 pounds. Regularly exposed to airborne particles, moving mechanical parts, extreme heat and vibration where LOTO and PPE must be used.
  • Occasionally required to climb or balance; and stoop, kneel, crouch, or crawl.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

  • Manufacturing and laboratory environments. The noise level in the work environment is usually moderate.
  • Frequently exposed to outside weather conditions.

This description is intended to describe the type and level of work being performed by a person assigned to this position. It is not an exhaustive list of all duties and responsibilities required by a person so classified.

The job may require additional hours beyond a 40-hour workweek.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
For informational purposes only, the range of pay for this role is $19 to $30 US Dollar (USD) Hourly based on a variety of factors. For informational purposes only, this role is eligible to participate in the Company’s Quarterly Cash Bonus Plan, paid out at the quarterly bonus factor of 2X the Company’s bonus multiple, based on the Company’s performance in the applicable quarter. Employees will receive 80 hours paid time off every year. Employees will also receive 10 paid holidays. Employees (and their families) are eligible to participate in the company&39;s medical, dental, vision, and basic life insurance. Employees are eligible to enroll in the Company’s 401(k) plan.
This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To be qualified to work in this facility, a successful applicant must be a U.S. Person, as defined in those regulations, and able to supply evidence of that qualification prior to starting work or be authorized to receive controlled information under a specific license or permission from the relevant government agency. The U.S. export control regulations define a U.S. person as a U.S. Citizen, U.S. National, U.S. Permanent Resident (i.e. &39;Green Card Holder&39;), and certain categories of Asylees and Refugees.
(Job and company information not to be copied, shared, scraped, or otherwise disseminated/distributed without explicit consent of JSfirm, LLC)

JSfirm, LLC

Roanoke, TX

jobs@jsfirm.com

JSfirm LLC, Privacy Policy

All rights reserved. 2001-2024 JSfirm